PROGRESS
First we created the base of the frustum using Coffee Stir Sticks. We glued 6 pieces together to create the 4 vertical pieces by gluing 4 together and 2 on either side to make it strong and secure. We then cut different sizes and glued the entire thing to form the skeleton.
We then added a piece of cardboard to hold the electronical aspects and to stand it on the solenoid. It is secured it with some sticks. We cut pieces of cardboard for all 4 sides + the top and spray painted them.
Soldered the wires toegether however it turned out to be a failure and we ended up using a breadboard.
Glued the front and back including the servo motors as well as putting the lens eye.
Top isn't glued.
Used a piece from a speaker as a stand. Put an axel through one of the hole sand screwed it in. Glued a wheel to the stand and put a solenoid on for bouncing.
Added arms made of straw + spray painted black + added string for extra bendyness. We also put an alligator clip at the end and pieces of cardboard spray painted black for hands.
Here it is in Motion.
The inside with all the electronics.
Finished the front aesthetic.